If you own a fiber laser pipe cutting machine, here are some tips to get the most out of it. These include focusing position, the center of the nozzle, and concentricity. Keeping these settings in order will help you get the best cut possible. Keeping these settings properly adjusted ensures that your machine produces the best quality cut possible. Below are other tips to help you get the most out of your machine.
When a fiber laser pipe cutting machine is used to cut pipes, its focusing position is of paramount importance. The lens to focus the beam focuses the laser to a small spot and allows for quality pipe cutting. The focusing position of the lens is directly proportional to the focal length of the fiber laser. Short focal length lenses allow the laser beam to focus with a small spot and increase the power density at the focal point, which helps cut materials. These lenses are also prone to having a short adjustment margin for focal depth and are therefore generally used for high-speed cutting applications.
Center of nozzle
The LS5 laser pipe cutting machine is available with different levels of laser power. Fiber laser generators with higher powers can cut thicker materials at faster speeds. The doors on the machine can be opened to access the working area fully. LS5 systems feature multiple settings for adjusting the nozzle’s height and focus position. This makes it easy to select the most appropriate settings for different materials.
There are two types of laser cutting machines. The single-side linear guide rail with roller structure has many advantages. It has an efficient adjustment process and can be easily installed. On the other hand, the drive unit structure has many advantages, including precision and ease of debugging. However, it is more expensive. Therefore, choosing a machine that has both features is essential.
To maintain the fiber laser’s cut quality, you must clean your equipment regularly. The first step in cleaning your machine is to empty the slag drawer. Unpacking the slag drawer properly is vital for your cutting machine’s performance. In addition, if you do not remove the slag drawer quickly, you may cause the table shuttle to jam. Once the slag drawer is empty, clean the slats and remove any scraps from the surface. Otherwise, new material may tip over the surface.